وظائف مهندس PLC في فلسطين

<ol><li><strong>Pal Drink Beverage Company</strong> is a leader in the beverage production sector, seeking to attract an ambitious and enthusiastic Mechatronics and Automation Engineer to join its team in <strong>Ni'lin – Ramallah</strong>.</li><li>We provide a professional, supportive work environment and genuine opportunities for professional development by participating in advanced projects in the fields of industrial automation, automatic control, and mechanical systems.</li><li>&nbsp;</li><li><strong>Key Responsibilities</strong></li><li>&nbsp;<ul><li>Operate and monitor beverage production and bottling lines.</li><li>Monitor the performance of machinery and equipment and ensure their efficient operation.</li><li>Perform preventive and corrective maintenance for equipment and production lines.</li><li>Diagnose mechanical, electrical, and control system faults and contribute to their resolution.</li><li>Program and adjust control systems (PLC and HMI) when necessary and improve equipment performance.</li><li>Participate in projects to develop and improve production efficiency and reduce downtime and waste.</li><li>Follow industrial safety and quality procedures within the factory.</li><li>Prepare technical reports regarding faults, maintenance, and equipment performance.</li><li>Coordinate with production, quality, and warehouse departments to ensure operational continuity.</li></ul></li><li>&nbsp;</li><li><strong>Required Skills</strong></li><li>&nbsp;<ul><li>Good knowledge of PLC and HMI systems.</li><li>Understanding of control systems, motors, and sensors used in production lines.</li><li>Ability to read electrical and mechanical diagrams.</li><li>Knowledge of industrial maintenance and troubleshooting.</li><li>Ability to work under pressure and in an industrial environment.</li></ul></li></ol>

الوظيفة: مهندس تشغيل وصيانة محطات تنقية تعلن شركة الخدمات البيئية العالمية عن حاجتها لتعيين مهندس تشغيل محطات تنقية وفني تشغيل محطات للانضمام إلى فريق العمل الفني لديها المهام والمسؤوليات: • الإشراف على التشغيل اليومي لمحطات تنقية الصرف الصحي وضمان كفاءة عملها • مراقبة جودة المياه في مختلف مراحل المعالجة وإجراء الفحوصات المخبرية الدورية • ضبط ومتابعة معدات المعالجة والمضخات • متابعة أنظمة التحكم الرئيسية الفرعية PLC وبرمجتها ومتابعة أنظمة SCADA • متابعة أعمال الصيانة الوقائية والدورية للمعدات والآلات في مختلف مناطق المحطة • إعداد التقارير الفنية اليومية والشهرية عن أداء المحطات بالإضافة الى تقارير الصيانة • الالتزام بمعايير السلامة المهنية والبيئية • التنسيق مع الفرق الفنية الأخرى لحل الأعطال الطارئة المؤهلات المطلوبة: • بكالوريوس هندسة ميكانيكية / كهربائية / ميكاترونكس او هندسة بيئية • خبرة لا تقل عن سنتين في مجال تشغيل وصيانة المضخات والمعدات الصناعية • الإلمام بأنظمة التحكم PLC والبرمجة، وأنظمة SCADA • يشترط أن يكون المتقدم من سكان منطقة رام الله أو إمكانية السكن فيها • اتقان اللغة الانجليزية • يشترط امتلاك رخصة قيادة سارية المفعول • معرفة جيدة بأنظمة معالجة المياه ومعايير الجودة المعتمدة • القدرة على العمل ضمن نظام الورديات المهارات الشخصية: • الدقة والإلتزام بالمواعيد • روح المسؤولية والعمل الجماعي • القدرة على اتخاذ القرار في المواقف الطارئة الوظيفة: فني تشغيل وصيانة محطات تنقية المهام والمسؤوليات: • الإشراف على التشغيل اليومي لمحطات تنقية الصرف الصحي وضمان كفاءة عملها • ضبط ومتابعة معدات المعالجة والمضخات • متابعة أنظمة التحكم الرئيسية والفرعية PLC ومتابعة أنظمة SCADA • متابعة أعمال الصيانة الوقائية والدورية للمعدات والآلات في مختلف مناطق المحطة • المحافظة على نظافة المعدات والآلات وموقع العمل بشكل دائم • أخذ قراءات العدادات ومجسات القياس بشكل دوري وبحسب الأوقات المتفق عليها، وأرشفتها • الالتزام بمعايير السلامة المهنية والبيئية • التنسيق مع مدير التشغيل والفرق الفنية الأخرى لحل الأعطال الطارئة المؤهلات المطلوبة: • دبلوم مهني في التخصصات الميكانيكية / الكهربائية / ميكاترونكس أو ما يعادلها • خبرة لا تقل عن سنتين في مجال تشغيل وصيانة المعدات الصناعية • الإلمام بأنظمة التحكم PLC وأنظمة SCADA • يشترط أن يكون المتقدم من سكان منطقة رام الله أو إمكانية السكن فيها • القدرة على العمل ضمن نظام الورديات المهارات الشخصية: • الدقة والالتزام بالمواعيد • روح المسؤولية والعمل الجماعي • القدرة على اتخاذ القرار في المواقف الطارئة بعد الرجوع إلى مدير قسم التشغيل أو مدير المحطة من يجد في نفسه الكفاءة المطلوبة ويلبي الشروط أعلاه، يرجى إرسال السيرة الذاتية إلى: مع ذكر اسم الوظيفة من يجد في نفسه الكفاءة المطلوبة ويلبي الشروط أعلاه، يرجى إرسال السيرة الذاتية إلى: مع ذكر اسم الوظيفة

Role Description This is a full-time, on-site Senior Electrical Engineer role based in the Palestinian Authority. The Senior Electrical Engineer will lead the design, review, and implementation of electrical and electro-mechanical systems for industrial, commercial, and infrastructure projects. Responsibilities include preparing detailed electrical designs and drawings, performing load calculations, selecting equipment, and ensuring compliance with relevant codes and standards. The role involves coordinating with project managers, site engineers, and other disciplines to support project planning, installation supervision, testing, and commissioning. The Senior Electrical Engineer will also provide technical guidance to junior engineers, review contractor and vendor submittals, support cost estimation and proposals, and contribute to continuous improvement of engineering processes and quality. Key Responsibilities Electrical Engineering & Design Prepare detailed electrical designs, calculations, specifications, reports, and engineering documentation. Design and review low-voltage (LV) and medium-voltage (MV) power distribution systems. Perform load calculations, cable sizing, voltage drop calculations, and short-circuit analysis. Design electrical rooms, switchgear systems, motor control centers (MCCs), and panelboards. Select and specify electrical equipment, transformers, generators, UPS systems, VFDs, protection devices, and control systems. Review and approve electrical shop drawings, technical submittals, and vendor documentation. Ensure compliance with local and international electrical standards, regulations, and best engineering practices. Automation, PLC & SCADA Systems Develop, program, modify, and troubleshoot PLC-based control systems. Design and configure SCADA and HMI systems for monitoring and control applications. Develop control philosophies, I/O lists, network architectures, and functional design specifications. Integrate PLC, SCADA, instrumentation, and communication systems. Configure industrial communication networks and protocols. Support testing, troubleshooting, and commissioning of automation systems. Participate in FAT (Factory Acceptance Tests) and SAT (Site Acceptance Tests). Qualifications Bachelor's Degree in Electrical Engineering from an accredited university. Professional certifications and specialized training in power systems, automation, or industrial control systems are considered an advantage. Valid driving license is preferred. Experience Requirements Minimum 4–5 years of relevant experience in electrical and electro-mechanical contracting projects. Proven experience in industrial, commercial, infrastructure, water, wastewater, energy, or utility projects. Demonstrated experience in electrical design, power distribution, and industrial automation systems. Experience in testing, commissioning, and troubleshooting electrical and control systems. Please send your CV to

<p>Al-Diyar Packaging and Packing Company announces its need to hire a specialized Production Machine and Line Engineer to work at our factory, provided that they have proven practical experience in the operation and maintenance of grain and powdered product packaging and packing machines.</p><p><strong>Key Duties and Responsibilities:</strong></p><ul><li>Direct technical supervision of grain and legume packaging lines and machines, in addition to fine and powdered products (salt, sugar, semolina, and flour).</li><li>Rapid diagnosis of technical malfunctions (mechanical, electrical, pneumatic) and their repair to ensure the continuity of the production process without interruption.</li><li>Calibration and adjustment of electronic filling scales (Multi-head / Auger Fillers) and thermal sealing devices to ensure weight accuracy and packaging quality.</li><li>Implementation and preparation of preventive and periodic maintenance programs for all machines, with a focus on protecting them from dust, dirt, and corrosion.</li><li>Monitoring spare parts consumption and maintenance of PLC devices and pneumatic systems for packaging liners and bags.</li></ul><p><strong>Essential Qualifications and Requirements:</strong></p><ul><li>Practical Experience: At least [3 to 5 years] of experience in operating and maintaining packaging and packing machines for grains and powders (such as Vertical Form Fill Seal (VFFS) machines, multi-head weighing systems, and Auger fillers).</li><li>Educational Qualification: Bachelor's degree in Engineering (Mechanical / Mechatronics / Electrical) or equivalent.</li><li>Precise practical knowledge of automated control systems (PLC), sensors, and pneumatic systems.</li><li>Ability to handle material clumping/dust issues in flour, semolina, and salt lines.</li><li>Excellent skills in technical troubleshooting and working under pressure.</li></ul><p><strong>How to Apply:</strong></p><p>Anyone who finds themselves qualified and meeting the required conditions, please send your CV with the email subject line (Packaging and Packing Engineer):</p><p>Email:</p><p>WhatsApp/Call:</p><p>+972599340410</p>

Etco Doors Technology Company ETCO Doors Technology announces its need to hire an Electrical Engineer / Mechatronics to work at the company branch in: Hebron – al-Hariyah Valley We are looking for a practical and field-ready engineer who has the ability and desire to work on electric and automatic door systems, and to participate directly in installation, operation, and maintenance work. ### Tasks and responsibilities: * Install, operate, and maintain electrical motors and control systems for electric and automatic doors. * Read and understand electrical diagrams and electronic boards and implement them in the field accurately. * Inspect and diagnose electrical faults, determine causes, and provide appropriate fast and efficient solutions. * Handle sensors, control panels, and PLC systems. * Coordinate with installation and maintenance teams to ensure completion of tasks and projects on time and with high quality. * Adhere to occupational safety standards and procedures while working at sites. ### Qualifications and requirements: * Bachelor’s degree in Electrical Engineering, Mechatronics Engineering, Automation and Control Engineering, or related specialty. * Very good knowledge of electrical fundamentals, circuits, sensors, and control systems. * Practical personality and ability to work in the field and use tools and technical equipment. * High skill in diagnosing faults and solving problems under work pressure. * Ability to work in a team and coordinate with technicians and engineers. * Flexibility to move between work sites according to the company’s needs. * Readiness to respond to urgent maintenance tasks or work outside official working hours when needed. **The nature of the job is field-based and practical primarily, not an office job.** For those interested, please fill out a Google Form and upload your CV via the following link: (must sign in with a Gmail account) https://forms.gle/QMf4pR2wVJYSqjFD9